Keithley 2601 User Manual page 19

Series 2600 System SourceMeter
3. Range keys:
AUTO
4. Output control and LED status indicator:
OUTPUT ON/OFF
LED indicator
5. navigation wheel and CURSOR keys:
When in source edit, use CURSOR keys for cursor control and then turn the to change a source or
compliance value. The can also be used to enable or disable the source edit mode.
When in a menu, use the CURSOR keys or for menu item cursor control. When displaying a menu
value, use the CURSOR keys for cursor control and turn the to change the value. Pressing the opens
a menu item, or selects a menu option or value.
6. Display indicators (not shown):
EDIT
ERR
REM
TALK
LSTN
SRQ
REL
FILT
AUTO
ARM
TRIG
* (asterisk) Readings being stored in buffer.
2600S-900-01 Rev. C / January 2008
®
Instruments User's Manual
and Selects the next higher or lower source or measure range.
Enables or disables source or measure auto range.
Turns source output on or off.
Turns on when output is on.
Unit is in the source editing mode.
Questionable reading or invalid cal step.
Unit in remote mode.
Unit addressed to talk.
Unit addressed to listen.
Service request.
Relative mode enabled.
Analog filter or Averaging filter is enabled.
Auto source or measure range selected.
Unit armed and ready to run.
External triggering selected.
Return to Section Topics
Section 1: Front and Rear Panel Operation
1-5