Product Name; Marketing Objective; Applications - Hitachi CL 10D2 Technical Data And Service Manual

1. PRODUCT NAME

Hitachi 10 mm Cordless Stud Cutter, Model CL 10D2

2. MARKETING OBJECTIVE

One of the primary uses of studs is for hanging of electric cable racks, air-conditioning ducts, and plumbing pipes
and drains. Studs are usually sold in standard lengths of 1 to 3 meters, and must be cut to desired lengths in
accordance with installation needs. They are currently being cut by cut-off machines, disc grinders, or manual
hack saws, frequently require the use of files and grinders for deburring and finishing before they can be used.
The Model CL 10D2 is the upgraded version of the Model CL 10D and is easier to operate and less expensive
with the same features such as clean cutting without sparks, dust and noise, minimal damage to studs and easy
processing after cutting. Thanks to the weight reduction of the motor, decelerating and cutting mechanisms, the
Model CL 10D2 weighs only 3.2 kg even though it uses the 12 V battery while the Model CL 10D using the 9.6 V
battery weighs 3.4 kg. The Model CL 10D2 becomes low price thanks to renewing the manufacturing processes
and sharing components with other models. In addition, the Model CL 10D2 is capable of cutting up to 550 studs
per single charge (when cutting M10 soft steel studs using the 12 V NiMH battery with nominal capacity 3.0 Ah).
This is about 4 times the capacity of the Model CL 10D. The Model CL 10D2 can correspond to various
applications with the wide selection of cutters (M10, M8, M6 and W3/8) and
can be used anywhere since it is cordless.

3. APPLICATIONS

Cutting of mild-steel studs
[Typical threaded stud applications]
Electric installation
• • • • • • • • • • • • • • • • • • •
Air-conditioning
• • • • • • • • • • • • • • • • • • • • • • •
Plumbing installation
• • • • • • • • • • • • • • • •
Stud
(1) Suspension of cable racks in electrical installation
M6 to M10
Suspension of luminaiers, cable racks, conduit pipes, etc.
Suspension of air-conditioning ducts, exhaust ducts, etc.
Suspension of feed and drain pipes
Stud
(3) Suspension of feed and drain pipes in plumbing work
--- 1 ---
Fig. 1
(2) Suspension of air-conditioning ducts
Stud
Fig. 2
Stud