Product Name; Marketing Objective; Applications - Hitachi CL 10SA Technical Data And Service Manual

1. PRODUCT NAME

Hitachi 10 mm Stud Cutter, Model CL 10SA

2. MARKETING OBJECTIVE

One of the primary uses of studs is for hanging of electric cable racks, air-conditioning ducts, and plumbing pipes
and drains. Studs are usually sold in standard lengths of 1 to 3 meters, and must be cut to desired lengths in
accordance with installation needs. They are currently being cut by cut-off machines, disc grinders, or manual
hack saws, frequently require the use of files and grinders for deburring and finishing before they can be used.
The current Model CL 10D stud cutter is, however, expensive because it is cordless and there is an increasing
demand for a low-price stud cutter with cord. The new Model CL 10SA is a light-weight and low-price stud cutter
adopting the same cam system as that of the Model CL 10D and sharing components with the Model CL 10D2
that is an upgraded version of the Model CL 10D. The Model CL 10SA can correspond to various applications
with the wide selection of cutters (M10, M8, M6 and W3/8).

3. APPLICATIONS

Cutting of mild-steel studs
[Typical threaded stud applications]
Electrical installation
• • • • • • • • • • • • • • • • • • •
Air-conditioning
• • • • • • • • • • • • • • • • • • • • • • • • • •
Plumbing installation
• • • • • • • • • • • • • • • • • •
Stud
(1) Suspension of cable racks in electrical installation
M6 to M10
Suspension of luminaiers, cable racks, conduit pipes, etc.
Suspension of air-conditioning ducts, exhaust ducts, etc.
Suspension of feed and drain pipes
Stud
(3) Suspension of feed and drain pipes in plumbing work
--- 1 ---
Fig. 1
(2) Suspension of air-conditioning ducts
Stud
Fig. 2
Stud