Hitachi CL 10D2 Technical Data And Service Manual page 19

8-1-2. Disassembly
(1) Bracket ass'y section
(a) Removal of the Cover [38] (Fig. 18)
Remove the two Machine Screws (W/Washers) M4 x 20 (Black) [37] from the Cover [38] and remove the
Cover [38].
(b) Removal of the Return Plate [41] (Fig. 20)
Remove the two Seal Lock Screws (W/SP. Washer) M4 x 12 [40] and remove the Return Plate [41].
(c) Removal of the Gear Cover [19] (Fig. 20)
Remove the four Tapping Screws (W/Flange) D5 x 25 (Black) [17] and the two Tapping Screws D5 x 35 [43].
Hold Bracket (B) [44] and Bracket (A) [42] and remove them being careful not to move Bracket (A) [42].
Then the Second Gear [22] and the Third Pinion [21] can be removed (Fig. 21).
[17]
[40]
[41]
[43]
[19]
Fig. 20
[21]
[42]
Press-fitted
[44]
--- 16 ---
[22]
Fig. 21