Management - Draytek VigorAP 902 User Manual

3 . 1 6 . 7 M a n a g e m
3 . 1 6 . 7 M a n a g e m
This page allows you to specify the port number for HTTP and HTTPS server.
Available parameters are explained as follows:
Item
Device Name
Management Port Setup
Wi-Fi Hardware Button
Setup
Telnet Server
LED Setup
e n t
e n t
Description
Name - The default setting is VigorAP 902. Change the
name if required.
HTTP port/HTTPS port -Specify user-defined port
numbers for the HTTP and HTTPS servers.
Stop people manually disabling the wireless if they do not
have the right of administration to access to the device.
Enable – Choose it to enable the hardware button function.
Disable – Choose it to disable the hardware button function.
Enable – The administrator / user can access into the
command line interface of VigorAP remotely for configuring
settings.
Disable – The administrator / user is unable to access into the
command line interface of VigorAP remotely for configuring
settings.
The color of LED (on or flashing) can be switched on or off
to meet your favor.
Enable – The LED will flash to indicate VigorAP is ready
and able to work normally.
Disable –The LEDs blink always since VigorAP is powered
on. Some people might not like that. Therefore the function
of LED is allowed to be disabled to make people feeling
225
VigorAP 902 User's Guide