Table of Contents
Advertisement
After finishing this web page configuration, please click OK to save the settings.
3
.
2
.
2
P
o
r
t
C
o
3
.
2
.
2
P
o
r
t
C
o
To avoid wrong connection due to the insertion of unsuitable Ethernet cable, the function of
physical LAN ports can be disabled via web configuration.
Available settings are explained as follows:
Item
Enable Port Control
Disable Port
After finishing this web page configuration, please click OK to save the settings.
VigorAP 902 User's Guide
Disable Server - Disable Server lets you manually or use other
DHCP server to assign IP address to every host in the LAN.
n
t
r
o
l
n
t
r
o
l
Description
Check it to enable the port control. If it is enabled, you are
allowed to disable the function of physical LAN port by
checking the corresponding check box.
Choose and check the LAN port.
Primary DNS Server - You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the modem will automatically apply default
DNS Server IP address: 194.109.6.66 to this field.
Secondary DNS Server - You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the modem will automatically apply default secondary
DNS Server IP address: 194.98.0.1 to this field.
Trust DHCP Server IP for WLAN
such VigorAP to assign IP address for wireless LAN user.
However, you can specify another valid DHCP server on
other VigorAP to make the wireless LAN client obtaining
the IP address from the designated DHCP server.
Specify a DHCP server in such field. All the IP addresses
of the devices on LAN of VigorAP will be assigned via
such specified server. It is used to avoid IP assignment
interference due to multiple DHCP servers in one LAN.
36
–
There is no right for
Hide quick links:
Advertisement
Table of Contents
