Initial Configuration; Connect To A Vigor Router Using Ap Management - Draytek VigorAP 903 Quick Start Manual

Initial Configuration

This section has three parts, with the first two demonstrating how to locate the
VigorAP on your network when connected to a DrayTek Vigor router.
If you already know the IP address of the VigorAP 903 on your network, go to
part 4.3 Web Configuration to configure the VigorAP for use.

4.1 Connect to a Vigor Router using AP Management

Your VigorAP can be used with Vigor routers which support AP management
(such as the Vigor 2862 or Vigor 2762 series). AP Management enables you to
monitor and manage multiple DrayTek APs from a single interface.
1. From the web interface of your Vigor router with AP management, open the
menu Central AP Management>>Status.
2. Locate the new VigorAP. Click the IP address assigned by your Vigor router
to access the web user interface of your VigorAP.
3. After typing the default username and password (admin/admin), the
VigorAP's web management interface will be displayed.
Remember to change your VigorAP's management password after
performing the initial setup.