Draytek VigorAP 902 User Manual page 98

Rate
PHY Mode
Subnet
Security
Peer MAC Address
After finishing this web page configuration, please click OK to save the settings.
VigorAP 902 User's Guide
from 3 to 4095. The VLAN ID is 0 by default, it means
disabling the VLAN function for the SSID.
If you choose 11g Only, 11b Only or 11n Only, such feature
will be available for you to set data transmission rate.
Data will be transmitted via HTMIX mode.
Each access point should be setup to the same PHY Mode for
connecting with each other.
Choose LAN-A or LAN-B for each SSID.
Select Disabled, WEP, TKIP or AES as the encryption
algorithm.
Four peer MAC addresses are allowed to be entered in this
page at one time.
88