Draytek VigorAP 902 User Manual page 52

802.11ac access point
Hide thumbs Also See for VigorAP 902:
Table of Contents

Advertisement

It is the simplest way to build connection between wireless network clients and VigorAP 902.
Users do not need to select any encryption mode and type any long encryption passphrase to
setup a wireless client every time. He/she only needs to press a button on wireless client, and
WPS will connect for client and VigorAP 902 automatically.
Note: Such function is available for the wireless station with WPS supported.
There are two methods to do network connection through WPS between AP and Stations:
pressing the Start PBC button or using PIN Code.
On the side of VigorAP 902 series which served as an AP, press WPS button once on the
front panel of VigorAP 902 or click Start PBC on web configuration interface. On the side
of a station with network card installed, press Start PBC button of network card.
If you want to use PIN code, you have to know the PIN code specified in wireless client.
Then provide the PIN code of the wireless client you wish to connect to the VigorAP 902.
VigorAP 902 User's Guide
42

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VigorAP 902 and is the answer not in the manual?

Questions and answers

Table of Contents