General Setup - Draytek VigorAP 902 User Manual

3 . 5 . 1 G e n e r a l
3 . 5 . 1 G e n e r a l
By clicking the General Setup, a new web page will appear so that you could configure the
SSID and the wireless channel. Please refer to the following figure for more information.
Available settings are explained as follows:
Item
Enable Wireless LAN
Enable Limit Client
Enable Limit Client
per SSID
Mode
Channel
VigorAP 902 User's Guide
S e t u p
S e t u p
Description
Check the box to enable wireless function.
Check the box to set the maximum number of wireless stations
which try to connect Internet through Vigor device. The
number you can set is from 3 to 64.
Define the maximum number of wireless stations per SSID
which try to connect to Internet through Vigor device. The
number you can set is from 3 to 64.
At present, VigorAP 902 can connect to 11b only, 11g only,
11n only, Mixed (11b+11g), Mixed (11g+11n) and Mixed
(11b+11g+11n) stations simultaneously. Simply choose Mixed
(11b+11g+11n) mode.
Means the channel of frequency of the wireless LAN. You may
44