Draytek VigorAP 902 User Manual page 132

Antenna
Tx Power
Rate Adaptation
Algorithm
Fragment Length
RTS Threshold
Country Code
After finishing this web page configuration, please click OK to save the settings.
VigorAP 902 User's Guide
VigorAP can be attached with two antennas to have good data
transmission via wireless connection. However, if you have
only one antenna attached, please choose 1T1R.
The default setting is the maximum (100%). Lowering down
the value may degrade range and throughput of wireless.
Wireless transmission rate is adapted dynamically. Usually,
performance of "new" algorithm is better than "old".
Set the Fragment threshold of wireless radio. Do not modify
default value if you don't know what it is, default value is 2346.
Minimize the collision (unit is bytes) between hidden stations
to improve wireless performance.
Set the RTS threshold of wireless radio. Do not modify default
value if you don't know what it is, default value is 2347.
VigorAP broadcasts country codes by following the 802.11d
standard. However, some wireless stations will detect / scan
the country code to prevent conflict occurred. If conflict is
detected, wireless station will be warned and is unable to make
network connection. Therefore, changing the country code to
ensure successful network connection will be necessary for
some clients.
122