Draytek VigorAP 902 User Manual page 202

RSSI
Channel
Encryption
Authentication
Mode
Ch. Width
Scan
Channel Interference
AP's MAC Address
AP's SSID
Select as Universal
Repeater
VigorAP 902 User's Guide
Display the signal strength of the access point. RSSI is the
abbreviation of Received Signal Strength Indication.
Display the wireless channel used for the AP that is scanned by
VigorAP 902.
Display the encryption mode for the scanned AP.
Display the authentication type that the scanned AP applied.
Display the wireless connection mode that the scanned AP
used.
Display the channel width that the scanned AP used.
It is used to discover all the connected AP. The results will be
shown on the box above this button
Access into Diagnostics>>Interference Monitor for viewing
interference status for channel(s).
If you want the found AP applying the WDS settings, please
type in the AP's MAC address.
To specify an AP to be applied with WDS settings, you can
specify MAC address or SSID for the AP. Here is the place
that you can type the SSID of the AP.
In Universal Repeater mode, WAN would work as station
mode and the wireless AP can be selected as a universal
repeater. Choose one of the wireless APs from the Scan list.
192