Review the Memory
Push the More Choices softkey until Review Memory is
shown, then push the Review Memory softkey to recall and
see results that you have kept.
When the Review Memory softkey is pressed, the display
changes to the screen shown in Figure 39.
Figure 39. Memory Review Screen
Push or and or the Go to Result softkey to view
a result that was kept.
Shop for Fluke products online at:
Log Data
Users can record a series of measurements for later upload
to a host computer that uses DPCTrack2 application
software. See "Communication with a PC". Up to 8000
readings can be recorded, depending on the reading rate,
duration, and how much memory is being used for other
things such as tasks or kept results. Record the reading rate
and duration in minutes. See Figure 40.
gks52s.bmp
Figure 40. Data Log Parameters Screen
MyFlukeStore
www.
Documenting Process Calibrator
Memory Operations
gks53s.bmp
1.888.610.7664
.com
83