Fluke 753 User Manual page 39
Documenting process calibrator
Hide thumbs
Also See for 753:
- User manual (130 pages) ,
- Calibration manual (52 pages) ,
- Getting started (22 pages)
Table of Contents
Advertisement
To set the time and date displays:
1.
Push s.
2.
Push the Next Page softkey. See Figure 9.
Figure 9. Time and Date Display
3.
Push and to move the cursor to the necessary
parameter, then push or the Choices softkey to
choose a setting for that parameter.
For example, the display in Figure 10 is shown after
you select Date Format.
Shop for Fluke products online at:
4.
Push or to move the cursor to the necessary date
format.
5.
Push to select the format and go back to Setup
gks38s.bmp
mode.
6.
Choose a different selection or push the Done softkey
or s to save the settings and exit Setup mode.
MyFlukeStore
www.
Documenting Process Calibrator
Date and Time
Figure 10. Edit the Date Format
1.888.610.7664
.com
gks39s.bmp
27
Advertisement
Table of Contents
