753/754
Users Manual
Note
If sourcing frequency, respond when the Product
asks you to select a zero-symmetric sine or
positive square wave. The amplitude specified is
p-p amplitude.
4.
To change the output value, record a new value and
push .
Note
g
If sourcing current, wait for the
disappear before you use the output.
46
Shop for Fluke products online at:
5.
To set the output value in the present source function,
push then enter the desired value and push .
6.
To turn off sourcing completely, push twice.
Use the source current function to drive a current
loop. This is different than the loop power function
in which the Product is powering a process
instrument. To source loop power, use the Loop
Power function accessible from Setup mode.
symbol to
MyFlukeStore
www.
Note
1.888.610.7664
.com