Summit X460-48P Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches

Summit X460-48p Switch

The front panel of the Summit X460-48p switch
Forty-eight autosensing 10/100/1000BASE-T ports (ports 1–48). In addition to 48 Gbps of
●
high-density copper connectivity, these ports provide up to 30 Watts of PoE per port.
Four unpopulated SFP ports (ports 49–52) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
10/100/1000 Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 115.
Stack number indicator
●
Figure 93: Summit X460-48p Switch Front Panel
Management port
Stack number
indicator
The rear panel of the Summit X460-48p switch
Two slots for port option cards or stacking modules (see
●
Replaceable fan tray
●
Two power supply bays for the Summit 750 W AC power supply (see
●
Supply" on page 154)
NOTE
Only the Summit 750 W AC power supply is compatible with the Summit X460-24p switch. Other Summit
replaceable power supplies do not support PoE operation in this switch.
Figure 94: Summit X460-48p Switch Rear Panel
Module slot A Module slot B
Filler panel Filler panel
114
(Figure
10/100/1000 Mbps ports
(Figure
Fan tray
Filler panel
93) includes:
"Summit X460 Series Switch LEDs" on
SFP ports
94) includes:
Table 30 on page
"Summit 750-Watt AC Power
Two power supply
(PSU) slots
SH_189
Summit Family Switches Hardware Installation Guide
Console
port
SH_186
107)