Summit X440-24X Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 40: Summit X440-24p Switch Rear Panel
2
1 = AC power input connector
2 = Stacking ports
3 = Redundant power connector

Summit X440-24x Switch

The front panel of the Summit X440-24x switch
24 unpopulated SFP ports (ports 1–24) that provide 24 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Four autosensing 10/100/1000BASE-T ports (ports 21–24) that provide 4 Gbps of high-density
●
copper connectivity.
These ports are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
●
management
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 77.
Stack number indicator
●
Figure 41: Summit X440-24x Switch Front Panel
1
X
4 5
1 = Ethernet management port
2 = SFP ports
3 = 10/100/1000BASE-T ports
Summit Family Switches Hardware Installation Guide
3
"Combination Ports and Failover" on page
2 3
6
4 = Stack number indicator
5 = Console port
6 = Combination ports
(Figure 41) includes:
"Combination Ports and Failover" on page
"Summit X440 Series Switch LEDs" on
Summit X440 Series Switches
1
SH_266
22.
22.
63