Overview; Removing A Summit Family Switch (Models Other Than Summit X460, X480, X650, And X670 Series) - Extreme Networks Summit X150 Series Hardware Installation Manual

Hide thumbs Also See for Summit X150 Series:
Table of Contents

Advertisement

Chapter 13: Removing a Summit Family Switch from a Rack

Overview

Depending on the switch model, the type of rack, and the position in the rack, a Summit family switch
may be installed using simple front-attached mounting brackets or a combinations of front and back
mounting brackets.
Table 79
installation.
Table 79: Summit Switch Removal Instructions
Switch Series
Summit X150 series
Summit X250e series
Summit X350 series
Summit X440 series
Summit X450 series
Summit X450a series
Summit X450e series
Summit X460 series
Summit X480 series
Summit X650 series
Summit X670 series
Removing a Summit Family Switch (Models Other
than Summit X460, X480, X650, and X670 Series)
To remove a Summit switch from a rack:
1 Remove power from the switch in one of the following ways:
AC-powered switch: Unplug the power cables from the from the wall outlets first and then from
the switch.
DC-powered switch: De-energize the DC circuit for all power connections. Loosen the retainer
nut and unplug the DC power connector from the DC power socket on the rear of the switch.
2 Disconnect the Summit switch from the redundant power supply (if applicable).
3 For a DC-powered switch, disconnect the ground:
a At the back of the switch, loosen the retaining screw on the ground lug.
b Pull the ground wire out of the lug and move the ground wire out of the way.
4 Loosen and remove the four screws holding the switch in place in the equipment rack.
5 Carefully remove the switch from the rack and place it on a secure, flat surface.
384
lists the locations of the removal instructions for each type of switch
Rack Type, Position
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Two-post, front-mount or mid-mount
Two-post, mid-mount
Two-post, front-mount,
Four-post rack
Two-post rack, mid-mount
Four-post rack
Two-post rack, front-mount or mid-mount
Page Number
page 384
page 384
page 384
page 384
page 384
page 384
page 384
page 386
page 390
page 391
page 392
page 395
page 397
page 398
Summit Family Switches Hardware Installation Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents