Summit X460-48t Switch
The front panel of the Summit X460-48t switch
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of
●
high-density copper connectivity
Four unpopulated SFP ports (ports 49–52) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
10/100/1000 Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
115.
Stack number indicator
●
Figure 85: Summit X460-48t Switch Front Panel
Management port
Stack number
indicator
The rear panel of the Summit X460-48t switch
Two slots for port option cards or stacking modules (see
●
Replaceable fan tray
●
Two power supply bays for either AC or DC power supplies (see
●
Power Supplies" on page
Figure 86: Summit X460-48t Switch Rear Panel
Module slot A
Module slot B
Filler panel
Filler panel
Summit Family Switches Hardware Installation Guide
(Figure
10/100/1000 Mbps ports
(Figure
152)
Fan tray
Filler panel
85) includes:
"Summit X460 Series Switch LEDs" on
SFP ports
86) includes:
Table 30 on page
"Summit 300-Watt AC and DC
Two power supply
(PSU) slots
SH_188
Summit X460 Series Switches
Console
port
SH_185
107)
109