Summit X440-8P Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches

Summit X440-8p Switch

The front panel of the Summit X440-8p switch
Eight fixed autosensing 100/1000BASE-T PoE+ ports (ports 1–8). In addition to 8 Gbps of
●
high-density copper connectivity, these ports also supports the PoE+ IEEE 802.3a standard and
provide up to 30 Watts of power per port up to a total power budget of 170 Watts.
Four unpopulated SFP ports (ports 9–12) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Two high-performance stacking ports with associated LEDs
●
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
●
management
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 77.
Stack number indicator
●
Figure 33: Summit X440-8p Switch Front Panel
1 2
5
4
1 = Ethernet management port
2 = 10/100/1000BASE-T PoE ports
3 = SFP ports
The rear panel of the Summit X440-8t switch
internal AC power supply operates from 100 VAC to 240 VAC.
Figure 34: Summit X440-8p Switch Rear Panel
1
1 = AC power input connector
58
(Figure 33) includes:
"Summit X440 Series Switch LEDs" on
3
6
4 = Stack number indicator
5 = Console port
6 = Stacking ports
(Figure 34) provides an AC power input socket. The
Summit Family Switches Hardware Installation Guide
SH_270
SH_271