Supplement; Technical Data - Vega VEGAPULS 63 Operating Instructions Manual

10 Supplement

10.1 Technical data

General data
Materials, wetted parts
- Process fitting
- Antenna encapsulated or hygieni-
cally encapsulated
- Process seal with hygienically en-
capsulated antenna
Materials, non-wetted parts
- Housing
- Seal ring between housing and
housing cover
- Inspection window in housing cover
for PLICSCOM
- Ground terminal
Torque of the flange screws
Weight
- Tri-Clamp, bolting
- Flanges
Output variable
Output signal
Signal resolution
Failure signal
Max. output current
Load
Damping (63 % of the input variable)
Fulfilled NAMUR recommendations
Input variable
Parameter
VEGAPULS 63 - 4 ... 20 mA/HART
316L
PTFE (TFM 1600), PFA plated, PVDF
Viton, EPDM
Plastic PBT (Polyester), Alu die-casting pow-
der-coated, 316L
NBR (stainless steel housing), silicone (Alu/
plastic housing)
Polycarbonate (UL-746-C listed)
316Ti/316L
60 Nm (44 lbf ft)
3.5 ... 6.0 kg (7.7 ... 13.2 lbs), depending on
size and housing material
4.2 ... 15.4 kg (9.3 ... 34 lbs), depending on
flange size and housing material
4 ... 20 mA/HART
1.6 µA
Current output unchanged 20.5 mA, 22 mA,
<3.6 mA (adjustable)
22 mA
see load diagram under Power supply
0 ... 999 s, adjustable
NE 43
distance between process fitting and product
surface
Supplement
51