Vega VEGAPULS 63 Operating Instructions Manual page 31

4 ... 20 ma/hart

Hide thumbs Also See for VEGAPULS 63:

Table of Contents

Set up with the indicating and adjustment module PLICSCOM

Removal is carried out in reverse order.

The indicating and adjustment module is powered by the

sensor, an additional connection is not necessary.

Fig. 26: Installation of the indicating and adjustment module

Note:

If you intend to retroﬁt VEGAPULS 63 with an indicating and

adjustment module for continuous measured value indication,

a higher cover with an inspection glass is required.

VEGAPULS 63 - 4 ... 20 mA/HART

Table of Contents