Vega VEGAPULS 63 Operating Instructions Manual page 39

Optional settings
VEGAPULS 63 - 4 ... 20 mA/HART
Set up with the indicating and adjustment module PLICSCOM
Current output - characteristics
Current output - max. current
Current output - min. current
Current output - failure
Unit of measurement
The values of the following functions are not reset to the reset
values (see chart) with "Reset":
Function
Lighting
Language
SIL
HART mode
Factory setting
Like basic setting, in addition special parameters are reset to
default values.
6)
Pointer
The min. and max. distance values are reset to the actual
value.
Additional adjustment and diagnosis options such as e.g.
scaling, simulation or trend curve presentation are shown in
the following menu schematic. You will find a detailed
description of these menu items in the operating instructions
manual "Indicating and adjustment module".
Special parameters are parameters which are set customer-specifically on
6)
the service level with the adjustment software PACTware™.
4 ... 20 mA
20 mA
4 mA
<3.6 mA
m(d)
Reset value
no reset
no reset
no reset
no reset
39