Ethernet Connector Specifications - Omron NY Series Hardware User Manual

4-2-4

Ethernet Connector Specifications

Details of the RJ45 Ethernet connectors are provided below.
There are three Ethernet ports, each with a specific function.
The Ethernet connectors are designated in the following manner.
• Connector number 1: EtherCAT.
This port is available for the Programmable Multi Axis Controller.
• Connector number 2: Ethernet.
This port is available for the Programmable Multi Axis Controller and supports Modbus-TCP.
• Connector number 3: Ethernet.
This port is available for Windows.
Additional Information
Refer to 2-10-11 Recommended EtherCAT Cables on page 2 - 24 for cable details.
The Ethernet connector locks automatically to prevent unintentional disconnection.
3
The view represents the Ethernet connector on the Box PC.
NY-series IPC Programmable Multi Axis Controller Hardware User's Manual (W580)
2 1
4 Specifications
4
4 - 15