Table of Contents
Advertisement
This chapter describes the data connections and configuration of the Enterprise Manager appli-
ance. It includes the following topics.
5.1 Enterprise Manager 2100 Configuration Overview
Enterprise Manager 2100 Configuration varies depending on how you deploy the appliance.
See Supported Enterprise Manager 2100 Deployments on page 14.
Ethernet Connections
The Enterprise Manager appliance provides four built-in Ethernet ports described in: Connect
the Enterprise Manager 2100 to a Network on page 40.
Port
MAINT ETH0
(Maintenance
Port)
MGMT ETH1
(Management
Port)
FLEET ETH2
(Fleet Man-
agement Port)
14413-200 Rev. A
Chapter 5: Configuration
Table 5-1. EM2100 Ethernet Ports
Description and Use
The Maintenance port is always enabled and is not password
protected. Use this port only configure the appliance or for
administrative access.
The SetNetGo access Ethernet port. You can define the
IP address.
AIVs cannot access this Ethernet port.
The port for AIV and MobilePlanner operational connections.
You can define the IP address. This is the connection port for
all AIVs, and also for the MobilePlanner client.
Enterprise Manager 2100 User's Guide
45
47
47
49
50
51
52
52
54
54
57
59
IP Address
Fixed: 1.2.3.4
User defined
User defined
45
Advertisement
Table of Contents
