Install Options; Install A Drive - Omron NY Series Hardware User Manual

5 Installation
5-2

Install Options

This section describes the installable options for the IPC Programmable Multi Axis Controller.
5-2-1

Install a Drive

A drive is a storage device for the IPC Programmable Multi Axis Controller.
Additional Information
• Depending on the product configuration a drive is already installed.
Refer to 1-5 Product Configuration on page 1 - 6 for storage details.
• Depending on the CPU type one or two drives are supported.
Refer to 4-1-4 CPU Specifications on page 4 - 5 for the number of supported drives.
• Refer to 2-10-4 Storage Devices on page 2 - 20 for the recommended drive models.
• Refer to 4-1-6 Storage Device Specifications on page 4 - 6 for drive specifications.
Prepare the following items:
• The drive
A drive is not supplied with the Box PC.
• The drive bracket with mounting screws
These are supplied with the Box PC.
To install a drive:
1
Ensure the Box PC is OFF.
2
Remove the drive cover.
(1) Push the lock lever
(2) Tilt the drive cover
(3) Remove the drive cover
5 - 6
2
3
1
.
1
.
2
.
3
NY-series IPC Programmable Multi Axis Controller Hardware User's Manual (W580)