Omron NY Series Hardware User Manual page 100

4 Specifications
Ethernet Connector LED Indicators
Each connector has LED indicators for speed, link and activity.
Indica-
Item
tor
A Link/Act
B Speed
EtherCAT Connector Specifications
The EtherCAT connector is assigned to the Programmable Multi Axis Controller.
This port can be used for communication between the Programmable Multi Axis Controller and Ether-
CAT Slaves. This port acts as an EtherCAT master.
Ethernet connector number
Communications standard
EtherCAT master specifications
Physical layer
Modulation
Baud rate
Duplex mode
Topology
Transmission media
4 - 16
A
B
Color Status
Yellow Not lit
Lit
Flashing
Not lit Not lit
Green Lit
Orange Lit
Item
NY-series IPC Programmable Multi Axis Controller Hardware User's Manual (W580)
No link
Link
Link and activity
10 Mbps or no link
100 Mbps link
1 Gbps link
Specifications
1
IEC 61158 Type 12
Class B (Feature Pack Motion Control compliant)
100BASE-TX
Baseband
100 Mbps (100BASE-TX)
Auto
Line, daisy, chain and branching
Twisted pair cable of category 5 or higher (double-shielded
straight cable with aluminum tape and braiding)
Description