Omron NY Series Hardware User Manual page 186

7 Maintenance
4
Replace the complete Fan Unit.
1
(1) Push the lever
(2) Lift the lever to tilt
(3) Remove
5
Insert the new Fan Unit in the Box PC.
Ensure the end of the Fan Unit
6
Connect the Fan Connectors to the board.
7
Mount the Cover.
8
Power ON the system.
Confirm both fans rotate immediately after Power ON.
The fans are replaced and the alarm is automatically reset.
7 - 12
3
2
to unlock the Fan Unit.
1
the Fan Unit.
2
the complete Fan Unit.
3
A
A
NY-series IPC Programmable Multi Axis Controller Hardware User's Manual (W580)
is positioned under the fan guide
B
B .