Actual Operation; Operation - Omron NY Series Hardware User Manual

• Always use the recommended uninterruptible power supply (UPS) to prevent data loss and other
system file integrity issues caused by unexpected power interruption. Back up the system files in the
planned way to prevent data loss and other system file integrity issues caused by incorrect opera-
tion.
• Use an Omron S8BA UPS with the correct revision number to prevent improper system shutdown.
• Power ON after the DVI cable is connected between the product and an external monitor.
• Always check the power supply and power connections before applying power. Incorrect power con-
nections can damage the product or cause burning.
• Always turn OFF the power supply to system before you attempt any of the following.
• Inserting or removing PCIe Cards
• Connecting cables
• Connecting or disconnecting the connectors
• Wiring the system
• Replacing or removing the HDD/SSD
• Replacing the Battery
• Replacing the Fan Unit
• Do not turn off the power supply or remove the USB memory device while the Controller is access-
ing the USB memory device. Data may become corrupted, and the Controller will not operate cor-
rectly if it uses corrupted data.
• Always turn OFF the power supply before you attempt any of the following. Connecting cables or
wiring the system Connecting or disconnecting the connectors.
• Do not disconnect the cable or turn OFF the power supply to the Controller when downloading data
or programs from Support Software. Doing so interrupts the data transfer, and a malfunction may
occur.

Actual Operation

• Choose a OS password that is not obvious to prevent unauthorized access.
• Remember the OS user name and password. The product is inaccessible without it.
• Before operating the system , please make sure the appropriate software is installed and config-
ured. Doing so may prevent unexpected operation.
• Install all updates and ensure the browser stays up-to-date.
• Install all updates and ensure the firewall stays up-to-date.
• Make sure that your OS environment is protected against malicious software and viruses.
• Install all updates and ensure virus definitions stay up-to-date.
• Do not remove the fan cover while the power is ON. Contact with a rotating fan may result in injury.
• Virtual memory settings can affect the performance of the system. Disable the paging file after in-
stallation of applications or updates.
• Correctly perform wiring and setting, and ensure that the shutdown by the UPS can be executed.
• The task execution times in the physical Controller depends on load of operating system applica-
tions. Before starting actual operation, you must test performance under all foreseeable conditions
on the actual system.

Operation

• Do not carry out the following operations when accessing a USB device or an SD Memory Card.
• Turn OFF the power supply of the product.
NY-series IPC Programmable Multi Axis Controller Hardware User's Manual (W580)
Precautions for Safe Use
17