Omron NY Series Hardware User Manual page 202

7 Maintenance
Repair Windows with the System Repair Disk
Use the following procedure to repair the Windows operating system with a System Repair Disk.
Ensure:
• The IPC Programmable Multi Axis Controller is powered OFF.
• A System Repair Disk is created earlier and it is available.
To perform a system repair:
1
Connect a USB keyboard, a USB mouse and a USB external DVD drive to the IPC Program-
mable Multi Axis Controller.
2
Power ON the IPC Programmable Multi Axis Controller and immediately press the F11 key re-
peatedly.
3
Insert the System Repair Disk in the DVD drive.
4
Select DVD Drive as boot device and press Enter.
The message Windows is loading files ... and a progress bar appear.
5
Press any key to start and wait until the recovery software started.
6
Select your keyboard language and then select Next.
The System Recovery Options window appears.
7
Select Restore your computer using a system image that you created earlier and select
Next.
8
Select Use latest available system image and then select Next.
The Re-Image Your Computer window appears.
9
Do not change the setting to restore C: , select Next.
10
Review the settings and select Finish.
11
Wait until the repair process is finished, this can take several hours.
12
Restart the IPC Programmable Multi Axis Controller.
Windows is repaired.
Additional Information
• Refer to http://windows.microsoft.com/ for System repair details.
• Refer to 5-9-2 Create a Windows System Repair Disk on page 5 - 59 for System Repair disk
creation.
• Refer to 5-9 Create a Windows System Repair Disk and a Windows Backup on page 5 - 59
for Backup creation.
7 - 28
NY-series IPC Programmable Multi Axis Controller Hardware User's Manual (W580)