Support Software; Available Ipc Programmable Multi Axis Controller Support Software - Omron NY Series Hardware User Manual

3-2

Support Software

This section provides an overview of the support software available for your IPC Programmable Multi
Axis Controller.
3-2-1
Available IPC Programmable Multi Axis Controller Support Soft-
ware
This section gives an overview of the software utilities available for the IPC Programmable Multi Axis
Controller.
Power PMAC Support Utility
Power PMAC IDE
Power PMAC NC16
Acontis EC Engineer
Select and download the utilities required from the mentioned websites.
NY-series IPC Programmable Multi Axis Controller Hardware User's Manual (W580)
Product
Power PMAC-NC16 SDK
Power PMAC-NC16 Run-
time
Description
This computer software is
used to shutdown and re-
boot the system.
This computer software is
used to configure the
Controller, create user
programs, and debug the
programs.
This computer software is
used to control working
machines and other CNC
machines with the Con-
troller. Use this software
when you do not custom-
ize the HMI screen.
This computer software is
used to control working
machines and other CNC
machines with the Con-
troller. Use this software
when you want to custom-
ize the HMI screen. The
product contains exten-
sion source codes used
for customization.
This computer software is
used to configure and
monitor the EtherCAT net-
work by using the Control-
ler as the EtherCAT mas-
ter.
3 Software
Details
This is pre-installed free
software.
This is pre-installed free
software that can also be
downloaded from the
website of Delta Tau Data
Systems, Inc.
This is non-free software.
Contact your OMRON
representative for infor-
mation on how to procure.
This is non-free software.
Contact your OMRON
representative for infor-
mation on how to procure.
This is pre-installed non-
free software that can al-
so be downloaded from
the website of Delta Tau
Data Systems, Inc.
3 - 3
3