Affixing A Label To A Power Cable - HP FlexFabric 12900 series Installation Manual

Figure 64 Affixing a label
Figure 65 shows the affixed labels when the cable is laid vertically and horizontally.
Figure 65 Affixed labels
TO:
B02 03 12

Affixing a label to a power cable

Stick the label to the recessed rectangular area on the identification plate. You can stick the label to either
side of the identification plate. Be sure to affix the labels on the same side of the identification plates.
A cable tie is bundled 2 cm (0.79 in) away from the connector. You can affix the label to other positions
as needed. Figure 64 shows how to affix a label when a cable is laid horizontally.
95