Appendix B Frus And Compatibility Matrixes; Mpus; Lpus - HP FlexFabric 12900 series Installation Manual

Appendix B FRUs and compatibility matrixes

This appendix describes the field replaceable units (FRUs) available for the HP FlexFabric 12900 switch
series and their compatibility.
All the FRUs in this appendix are hot swappable.

MPUs

MPU is the core of the control management plane for the switch. The 12910 AC switch supports the MPU
LSX1SUP10A1. MPUs are ordered separately.
An HP FlexFabric 12900 switch requires one MPU for proper operation. You can also install two MPUs
for redundancy.
Table 19 describes the MPU specifications, and
matrix.
Table 19 LSX1SUP10A1 specifications
Item
Interfaces
Interface transmission
rate
Cables and max
transmission distance
Table 20 MPU product code and model matrix
MPU model
LSX1SUP10A1

LPUs

The LPUs in
transceiver modules that each LPU supports, see
Description
•
One console port
•
One 10/100/1000BASE-T interface for management and upgrade
•
One USB port
•
Console port—No greater than 1 15200 bps and defaults to 9600 bps
•
10/100/1000BASE-T interface—10/100/1000 Mbps, half/full duplex
•
Console port—15 m (49.21 ft) over common asynchronous serial interface cable
•
10/100/1000BASE-T interface—100 m (328.08 ft) over category-5 twisted pairs
Product code
JG621A
Table 21 apply to the HP FlexFabric 12900 switches. For more information about the
Table 20
HP description
HP FlexFabric 12910 Main Processing Unit
"Transceiver
70
shows the MPU product code and model
modules."