Affixing A Label To A Power Cord - HP FlexFabric 12900E series Installation Manual

Figure 74 Affixing a label
Figure 75 shows the affixed labels when the cable is laid vertically and horizontally.
Figure 75 Affixed labels
TO:
B02 03 12

Affixing a label to a power cord

Stick the label to the recessed rectangular area on the identification plate. You can stick the label to
either side of the identification plate. Be sure to affix the labels on the same side of the identification
plates.
A cable tie is bundled 2 cm (0.79 in) away from the connector. You can affix the label to other
positions as needed. Figure 76 shows how to affix a label when a cable is laid horizontally.
120