Table of Contents
Advertisement
Figure 21 Installing an AC power supply
(1) Install the power supply to the chassis.
Connecting the power cable
Connecting an AC power cable
WARNING!
Before connecting the power cable, make sure the circuit breaker on the power cable is switched off.
To connect an AC power cable:
1.
Plug the power cable into the power receptacle of the power supply.
2.
Use a cable tie to secure the power cable to the cable management bracket.
Figure 22
1
2
shows how to connect the power cable for a 1 1908-V.
(2) Fasten the captive screw.
26
Advertisement
Table of Contents
Troubleshooting
