Table of Contents
Advertisement
Foundry Hardware Installation Guide for the NetIron CES 2000 Series
Reverse Rack Mount Position
Figure 3.7
Reverse Rack Mount Position
CAUTION:
When attaching the chassis to the rack, star washers shall be used to provide better grounding of the
chassis to the rack. Additionally if any single hole grounding lugs are used star washers shall be used as a means
to prevent rotation of the lug.
You will need the following tools for installation:
•
#2 Phillips-head screwdriver
•
It will take between 12-24 screws to mount the Foundry device to the rack.
Installation Steps
1.
Mount the device in the rack as illustrated in Figure 3.4.
3 - 12
© 2009 Brocade Communications Systems, Inc.
March 2009
Advertisement
Table of Contents
