Performing A Paper Registration Adjustment - Xerox VersaLink C600 User Manual

3. Touch Device > Support > Image Position.
4. Select the source paper tray for the registration print.
a. Touch Paper Supply.
b. Touch the desired tray.
5. If your printer has automatic 2-sided printing, select the sides that you want to
optimize.
• To select a sample registration page for adjusting side 1, touch Adjusted Side,
then touch Side 1.
• To select a sample registration page for adjusting both sides, touch Adjusted
Side, then touch Side 2.
6. Specify the consecutive number of sample pages to print.
a. Touch Print Settings.
b. To increase or decrease the number of sample pages, for Quantity, touch the
Plus icon (+) or the Minus icon (-), then touch OK.
7. To print the sample pages, touch Print Sample.
8. When printing is completed, touch Close.
9. On the sample pages, for Side 1, use a ruler to measure the distance of the printed
image from the top, bottom, left, and right edges.
Note
For identification, a single dot is printed on Side 1, and two dots are printed on Side
2.
10. For Side 2, measure the distance of the printed image from the top, bottom, left,
and right edges.
11. If the image is centered, no adjustment is required. If the image is not centered,
adjust the paper registration. For details, refer to
Adjustment.

Performing a Paper Registration Adjustment

1. At the control panel, press the Home button.
2. Log in as administrator. For details, refer to the System Administrator Guide at
www.xerox.com/office/VLC600docs.
3. Touch Device > Support > Image Position.
® ®
Xerox VersaLink C600 Color Printer
User Guide
Maintenance
Performing a Color Registration
7-9