Attaching A Wilson Inside Antenna (Laptop/Data Card); Optional Cell Phone Cradle Plus - Wilson Electronics 801230 Installation Manual

Signalboost vehicle wireless dual-band amplifier
Table of Contents

Advertisement

Laptop or Data Card
Attaching a Wilson Ultra-slim Inside Antenna to a Laptop or a Cellular Data Card

Optional Cell Phone Cradle Plus


Amplifier
On laptop
On cellular data card
Ultra-slim
Antenna
The Ultra-slim antenna must be placed on or
near the cellular data card to work properly.
Attach the Ultra-slim antenna to the laptop
or cellular data card with the VELCRO
included in the package. IMPORTANT:
The adhesive of the gray Velcro patch that
adheres to the laptop or cellular data card
needs time to "cure." For best results, do not
use the Velcro connection for a minimum of
24 hours after application.
The Ultra-slim antenna included in the
package is long enough to reach the
amplifier location. This allows for ease and
convenience of use.
To maximize performance, attach the Ultra-
slim antenna as close as possible to the
original antenna on your laptop or cellular
data card.
If you have questions as to the placement of
the Ultra-slim antenna, call Wilson Technical
Support at 866-294-1660 or visit
www.wilsonelectronics.com.
As an alternative to the Ultra-slim antenna,
Wilson offers the Cell Phone Cradle Plus, a
high-quality phone cradle with a built-in inside
antenna. The Cradle Plus accommodates
any cell phone or wireless-capable PDA and
supports any hands-free device including
earbuds and Bluetooth products.
Like the Ultra-slim antenna, the Cradle Plus
communicates with multiple cell phones
and data cards in the vehicle. The cable
from the Cell Phone Plus attaches to the
"Inside Antenna" connector on the amplifier.
®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

271230

Table of Contents