Installing A Wilson Outside Antenna - Wilson Electronics 271245 Installation Manual

Installing a Wilson Amplifi er
5
!
Warning: Do not plug in the DC power
supply until the outside and inside antenna
cables are attached to the amplifi er.
Select a location to install the amplifi er that
is away from excessive heat, direct sunlight
or moisture and that has proper ventilation.
Recommended installation locations are:
• Under the seat
• Under the dash
Run the cable from the outside antenna and
attach it to the FME-Male connector labeled
"outside antenna" on the amplifi er.
Attach the inside antenna cable to the FME-
Male connector labeled "inside antenna" on
the amplifi er.