Before Getting Started - Wilson Electronics 801230 Installation Manual

Before Getting Started

This guide will help you properly install Wilson's SignalBoost Vehicle Wireless amplifier. It is
important to read through all of the installation steps for your particular application
prior to installing any equipment. Read through the instructions, visualize where all the
equipment will need to be installed and do a soft installation before mounting any equipment.
If you do not understand the instructions in full, seek professional help, or contact Wilson
Technical Support at 866-294-1660.
Installation Diagram
Inside Antenna
Ultra-slim
Inside
Antenna
Installation Diagram
Laptop Use

Outside
do not plug the amplifier directly into the
Antenna
cell phone or data card using an antenna
adapter. It will damage the amplifier.
DC Power
Supply
Amplifier
Outside
directly into the laptop or data card using
Antenna
an antenna adapter. It will damage the
amplifier.
DC Power
Supply
Amplifier
!
Warning: In a wireless installation,
Cell Phone
PDA
Notebook
!
Warning: Do not plug the amplifier
Laptop with Ultra-
slim antenna
attached (see pg. 7)