Aspecial Commands - Datalogic MATRIX 210 Programming Manual

A
A SPECIAL COMMANDS
ID-NET™ SPECIAL COMMANDS
The following special command allows to send strings to a Slave #N through the Master
device in an ID-NET™ reading system layout. In order to send this special command, it is not
necessary to switch the reader into Host Mode.
This special command can be used to send
Reading Phase OFF
device in an ID-NET™ reading system layout.
The Matrix 210™ 'Send String To Slave Device #N' special command must have the
following format:
Where:

ADDR:

STRING:
ADDR is a character indicating address of the device in an ID-NET™ Master/Slave reading
system layout:
ADDR = <30 > + <Device Address> where:
H
Device Address = 0:
Device Address = 1 to 31:
Device Address = 32:
This means:
ADDR = <30 >:
H
ADDR = <31 > to <4F
H
ADDR = <50 >
H
74
strings (for One Shot and Phase Mode operating modes) to a Slave
<ESC> ( <B0 > ADDR STRING ) <ESC>
H
Device Address
String To Send (Length: 1 to 32)
Standalone device or Master ID-NET™ device
Slave ID-NET™ device
ID-NET™ broadcast address
Standalone device or Master ID-NET™ device
>: Slave ID-NET™ device
H
ID-NET™ broadcast address
HOST MODE PROGRAMMING
Reading Phase ON, Acquisition Trigger and