How To Send A Single Parameter To The Reader - Datalogic MATRIX 210 Programming Manual

PROGRAMMING STRINGS

3.2 HOW TO SEND A SINGLE PARAMETER TO THE READER

The Matrix device single parameter programming string must have the following format:
Parameter Depth = 1
Where:
 Character identifying the category of the parameter to program.
CHR1:
 Character identifying the Function in the category.
CHR2:

Character or string indicating the assigned parameter Value.
DATA:
Parameter Depth > 1
Where:

Character identifying the Function of the parameter to program.
CHR1:

CHR2,CHR3: Character indicating the Depth of the parameter to program.
 > Special characters used to indicate parameter Depth > 9.
<FE >,<FD
H H

Character or string indicating the assigned parameter Value.
DATA:
The following command must be transmitted after sending each programming string:
If the programming is correct, the device confirms with the following message:
If programming contents are wrong (i.e. a typing error in the file) or due to a transmission
error, the device replies with the following message and programming data will not be
updated in this case:
After transmitting the proper reply message, the device then waits for one or more
programming strings.
<ESC> CHR1 CHR2 DATA
<ESC> CHR1 CHR2 [CHR3 <FE
<ESC> I A #
<ESC> K <CR><LF>
<ESC> W 1 <CR><LF>
> <FD >] DATA
H H
3
9