Datalogic MATRIX 210 Programming Manual page 20

3
Parameter Depth > 1
<ESC> CHR1 CHR2 [CHR3 <FE
Where:
 Character identifying the Function of the parameter to get.
CHR1:

CHR2,CHR3: Character indicating the Depth of the parameter to get.

> Special characters used to indicate parameter Depth > 9.
<FE >,<FD
H H
 Character or string indicating the current parameter Value.
DATA:
If sequence contents are wrong (i.e. a typing error in the file) or due to a transmission error,
the Slave device replies with the following message:
After transmitting the proper reply message, the Slave device then waits for one or more get
strings or one or more programming strings or the exit from host mode command.
16
> <FD
H
<ESC> W 1 <CR><LF>
HOST MODE PROGRAMMING
>] DATA <ESC> I A #
H