Datalogic MATRIX 210 Programming Manual page 12

3
At Least One (Type = 4)
Item List
List of the allowed values of the parameter
Selection
Maximum number of values selectable at the same time (normally the number of items
available in the list).
Default
0
Default entries (2 = first entry of the list, 2
list). The default value is given by the sum of the selected entries of the list.
Example: Reading Phase ON parameter
Type: 4
Label: Reading Phase ON
Item List External Trigger Leading Edge, External Trigger Trailing Edge, Main Port
String, Auxiliary Port String, Input 2 Leading Edge, Input 2 Trailing Edge,
Ethernet String, Fieldbus String, Fieldbus Input Leading Edge, Fieldbus Input
Trailing Edge
Selection: 9
0
Default: 1 (2  External Trigger Leading Edge)
Caution: This parameter type cannot be set to 0.
Example:
External Trigger Leading Edge: Entry 0  Value = 2
External Trigger Trailing Edge: Entry 1  Value = 2
Main Port String + Auxiliary Port String: Entry 2 + Entry 3  Value = 2
8
1
= second entry of the list, .2
0
= 1.
1
= 2.
HOST MODE PROGRAMMING
2
= third entry of the
2 3
+ 2 = 12.