Setting Measurement Parameter (Material Measurement); Procedure - Agilent Technologies E4991A Operation Manual

Display Setting

Setting Measurement Parameter (Material Measurement)

Setting Measurement Parameter (Material Measurement)
When using "Option 002 material measurement" with the E4991A for material
measurement, select the parameters by following the procedure below.

Procedure

Step 1. Click inside the window of the trace whose measurement parameter you want to select (or
click the measurement parameter name (area e.g.
press the
Step 2. Right-click to open the shortcut menu and select
Step 3. Click on the
parameter. (In material measurement, parameters in Table 5-3 to Table 5-6 are added to the
impedance measurement parameters).
Table 5-3
Meas Parameter
Meas Parameter:
εr'
εr"
tanδ (ε)
|εr|
Table 5-4
Meas Parameter
Meas Parameter:
εr
Table 5-5
Meas Parameter
Meas Parameter:
μr'
μr"
tanδ (μ)
|μr|
102
key on the front panel), thus making the trace active.
drop-down box and select the desired measurement
Meas Parameter
Box (for dielectric material/scalar traces)
Box (for dielectric material/complex traces)
Box (for magnetic material/scalar trace)
εr" ) in an overlay display) (or
2: [MU]
(or press
Meas/Format
Measurement Parameter
Real part of complex permittivity (
Imaginary part of complex permittivity (
δ
Dielectric loss tangent ( tan
Absolute value of complex permittivity (
Measurement Parameter
Complex permittivity ( ε )
r
Measurement Parameter
Real part of complex permeability (
Imaginary part of complex permeability (
Magnetic loss tangent ( tan δ )
Absolute value of complex permeability (
).
ε'
)
r
ε"
)
r
)
ε
)
r
μ'
)
r
μ"
).
r
μ )
r
Chapter 5