Confirmation of Options and Firmware Version
The options and the version of firmware installed in the E4991A can be confirmed by
following the procedure below.
Operation Procedure
Step 1. Open the shortcut menu by right-clicking and select
Step 2. Click the
where you can confirm the installed options and firmware version.
Figure 9-15
About E4991A dialog box
Step 3. Close the About E4991A dialog box by clicking the
Chapter 9
Setup and Use of Control/Management Functions
Confirmation of Options and Firmware Version
button. This opens the About E4991A dialog box (Figure 9-15),
About E4991A
(Or press
).
System
button.
OK
203