Meas/Format Menu - Agilent Technologies E4991A Operation Manual

Meas/Format
Meas/Format - Meas/Format...
Menu Bar Setup Toolbar
(Key)
Meas/Format
- Meas/Format:
Meas/Format
( )
-Meas Parameter
-Format
-Expand Phase[ ]
-Phase Unit[ ]
-Sweep Average[ ]
-Swp Avg Count
-Sweep Average
Restart
Appendix D
Menu
Function
Selects measurement parameter for the active
trace. The available measurement parameter will
depend on the measuring mode (impedance,
derivative, magnetic measurement).
Set the display format for the active trace to the Y
axis. The available display format will depend on
the scalar trace and the complex trace.
Available only when the active trace measurement
parameter is θz, θy, or θγ. This function sets the
phase expansion display for the active trace. When
On it can display phase traces beyond ±180°
without folding back.
Available only when the active trace measurement
parameter is θz, θy, θγ. This function sets the
phase display unit [Degree/Radian] for the active
trace.
This function sets the sweep average for all of the
traces [On/Off]. For more on sweep averaging,
refer to "Averaging Plural Sweeps
(Sweep-to-Sweep Averaging)" on page 71.
Available only when sweep averaging is On. This
function sets the sweep averaging count from 1 to
999.
Available only when sweep averaging is on. This
function restarts the measurement and clears the
sweep count to 1.
Menu References
Menu References
GPIB Command
CALC{1-5}:FORM
DISP:TRAC{1-5}:GRAT:FOR
M
DISP:TRAC{1-3}:Y:SPAC
CALC{1-3}:FORM:PAR:EPH
CALC{1-5}:FORM:UNIT:AN
GL
CALC:AVER
CALC:AVER:COUN
CALC:AVER:CLE
379