Summary - LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series 520 Hardware Manual

6.3

Summary

6-8
EMM386.EXE is loaded. If you do not do this, you cannot
access the boot drive after EMM386 is loaded.
This chapter discussed hardware installation. Configure the RAID system
using software configuration utilities. See the MegaRAID Configuration
Software Guide for all information about MegaRAID SCSI 320-0 software
utilities. The utility programs for configuring MegaRAID SCSI 320-0 are
shown in Table 6.4.
Table 6.4 Configuration Utilities and Operating Systems
Configuration Utility
MegaRAID BIOS Configuration Utility
WebBIOS Configuration Utility
MegaRAID Manager
Power Console Plus
Hardware Installation
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Operating System
Independent of the operating system
Independent of the operating system
DOS
Red Hat Linux 7.2, 7.3
Novell NetWare 5.1, 6.0
Microsoft Windows NT
Windows 2000
Windows XP
Windows .NET