6.1
Hardware Requirements
Chapter 6
Hardware Installation
This chapter explains how to install the MegaRAID SCSI 320-0 controller.
It contains the following sections:
·
Section 6.1, "Hardware Requirements"
·
Section 6.2, "Installation Steps"
·
Section 6.3, "Summary"
You must have the following in order to install the MegaRAID SCSI 320-0
controller and create arrays:
·
A host computer with the following:
–
Special ZCR PCI expansion slot
–
Installed LSI Logic 53C1030 SCSI chip
–
Support for PCI version 2.2 or later
–
Intel Pentium, Pentium Pro, or more powerful CPU
–
Floppy drive, color monitor, VGA adapter card, mouse, and
keyboard
·
The MegaRAID SCSI 320-0 Installation CD
·
An Uninterruptible Power Supply (UPS) for the entire system
·
Ultra320, Ultra, Fast SCSI 2 or Wide SCSI hard disk drives
MegaRAID SCSI 320-0 Hardware Guide
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
6-1