Megaraid Scsi 320-0 Specifications; Pci Bridge/Cpu; Megaraid Bios - LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series 520 Hardware Manual

Lsi logic megaraid scsi 320-0 zero-channel raid controller user's guide
Hide thumbs Also See for MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series 520:
Table of Contents

Advertisement

4.9

MegaRAID SCSI 320-0 Specifications

4.9.1

PCI Bridge/CPU

4-6
Table 4.6
lists the specifications for the SCSI 320-0.
Table 4.6
MegaRAID SCSI 320-0 Specifications
Parameter
Card size
Processor
Bus type
PCI controller
Bus data transfer rate
BIOS
Cache configuration
Firmware
Nonvolatile RAM
Operating voltage
SCSI data transfer rate Up to 320 Mbytes/s
SCSI device types
supported
RAID levels supported
MegaRAID SCSI 320-0 uses the Intel i960RM PCI bridge with an
embedded 80960JX RISC processor running at 66 MHz. The RM bridge
handles data transfers between the primary (host) PCI bus, the
secondary PCI bus, cache memory, and the SCSI bus. The DMA
controller supports chaining and unaligned data transfers. The
embedded 80960JX CPU directs all controller functions, including
command processing, SCSI bus transfers, RAID processing, drive
rebuilding, cache management, and error recovery.
Features
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Specification
2.536 x 6.6 inches (low-profile PCI)
Intel GC80302 integrated I/O processor
PCI 2.2
Intel GC80302
Up to 132 Mbytes/s

MegaRAID BIOS

Predefined during manufacturing; ECC through a
66MHz 72-bit unbuffered 3.3V SDRAM.
1 MB × 8 flash ROM
32 Kbytes × 8 for storing RAID configuration
5.00 V ± 0.25 V
Synchronous or asynchronous. Disk and non-disk.
0, 1, 5, 10, and 50

Advertisement

Table of Contents
loading

This manual is also suitable for:

520 series

Table of Contents